Lead-acid batteries
The largest use of refined lead. It is milled into oxide for the battery paste and alloyed with calcium or antimony for the grids.
Lead ingot supplier in Turkey for battery makers, cable producers, sheet and shielding manufacturers and alloy producers. Refined lead at 99.97% minimum, the purity the LME lead contract starts from, and 99.99% for battery oxide and low-impurity work, to EN 12659, GB/T 469 and ASTM B29. Exported from Turkey in bulk under FOB, CIF, CFR and DAP terms.

Lead ingot is refined lead metal cast into ingots or blocks for remelting. Most of it goes into lead-acid batteries, as oxide for the active material and as alloy for the grids; the rest goes to cable sheathing, rolled sheet, radiation shielding and lead alloys. Buyers specify it by grade: a lead content, plus a maximum for silver, bismuth, copper, antimony, tin, zinc and the other trace elements. Atso Tek is an Istanbul-based trade company and refined lead ingot supplier for buyers in Turkey and for export.
Refined lead is sold by purity grade. EN 12659 and GB/T 469 define each grade by its impurity maximums, and the lead content is 100% minus the sum of impurities. Quote the lead content and the standard together. Availability of each grade is confirmed on the offer.
The minimum purity the LME lead contract accepts: total impurities at 0.030% maximum, with bismuth up to 0.030% and silver up to 0.0050%. EN 12659 lists it as PB970R, GB/T 469 as Pb99.970 and ASTM B29 as Refined Pure Lead. The general-purpose grade for alloying, cable sheathing, sheet and shielding.
A middle grade with total impurities at 0.015% maximum and cadmium cut to 0.0002%. EN 12659 PB985R, GB/T 469 Pb99.985. Specified where the bismuth or silver allowance of the 99.97% grade is too wide but 99.99% is not required.
Total impurities at 0.010% maximum, with bismuth at 0.0100% and silver at 0.0015%. EN 12659 PB990R, GB/T 469 Pb99.990. The usual grade for battery oxide, where trace elements raise gassing and shorten service life.
Limits per BS EN 12659, in mass percent. Every element is a maximum; the indicative lead content is 100 minus the total of impurities. The certificate of analysis for each lot is checked against the grade you order.
| Element | PB970R | PB985R | PB990R | Unit |
|---|---|---|---|---|
| Lead (Pb), indicative | 99.970 | 99.985 | 99.990 | % |
| GB/T 469 grade | Pb99.970 | Pb99.985 | Pb99.990 | |
| Silver (Ag), max | 0.0050 | 0.0025 | 0.0015 | % |
| Arsenic (As), max | 0.0010 | 0.0005 | 0.0005 | % |
| Bismuth (Bi), max | 0.030 | 0.0150 | 0.0100 | % |
| Cadmium (Cd), max | 0.0010 | 0.0002 | 0.0002 | % |
| Copper (Cu), max | 0.0030 | 0.0010 | 0.0005 | % |
| Nickel (Ni), max | 0.0010 | 0.0005 | 0.0002 | % |
| Antimony (Sb), max | 0.0010 | 0.0005 | 0.0005 | % |
| Tin (Sn), max | 0.0010 | 0.0005 | 0.0005 | % |
| Zinc (Zn), max | 0.0005 | 0.0002 | 0.0002 | % |
| Total impurities, max | 0.030 | 0.015 | 0.010 | % |
Note: Source: BS EN 12659:1999 as reproduced in the LME special contract rules for lead. GB/T 469 defines the same three grades with small differences in copper, antimony and zinc and adds an iron maximum; ASTM B29 Refined Pure Lead (UNS L50021) is 99.97% minimum by difference. These are standard limits, not a lot analysis; the certificate of analysis for your lot is issued with the shipment.
Lead ingot is a remelt product. The grade is chosen by how much bismuth, silver and other trace elements the downstream process tolerates.
The largest use of refined lead. It is milled into oxide for the battery paste and alloyed with calcium or antimony for the grids.
An extruded lead sheath protects power and submarine cable against water and chemical attack.
Rolled lead sheet for roofing, flashing, waterproofing and sound insulation.
Lead's density makes it the standard shielding material for X-ray rooms, medical and industrial imaging and nuclear facilities.
Every lead ingot shipment ships with the paperwork you need to clear customs and pass incoming inspection.
Lead and lead alloys, lead: grades including PB970R, PB985R and PB990R
Lead ingots, grades Pb99.970 to Pb99.994
Refined lead, including Refined Pure Lead (99.97%)
Unwrought lead; 7801.10 covers refined lead
The LME lead contract accepts refined lead of 99.970% minimum from registered brands, to BS EN 12659 (PB970R, PB985R, PB990R), GB/T 469 or ASTM B29. Under EN 12659 the lead content is 100% minus the total of impurities, so the impurity table, not the headline number, defines the grade.
Send the grade, your monthly volume, destination port and preferred Incoterm. You'll get a written quote with FOB, CIF, CFR or DAP pricing and lead time within one business day.